It's All About Airflow Making a voice, with or without a larynx, is a matter of simple physics. Everything can be in place to allow you to make a voice, but without airflow, no sound will be produced. And, the better the airflow (think: speed and volume), the better the tissues will vibrate. Want to get louder? Push more air!
Imagine your throat is a muscular tube (it is!). If you tighten up the tube, air will have a harder time passing through there. If you keep the tube loose and open (relaxed), the air will flow much better.
|
A video demonstrating how you can be
|
Seal Check!
Few things can interfere more with achieving your best voice as much as a poor seal. If you wear an adhesive housing, be sure to change your adhesive as necessary when the seal is no longer effective. Below, however, are guidelines for ensuring the best seal possible.
Read more about how to apply an adhesive housing here (link) Regardless of the method you use to seal your tracheostoma, you should be sure no air is leaking from the stoma when you are trying to speak. The following are the most common ways to seal your tracheostoma during voicing. |
|
- Adhesive Housing with HME Cassette:Be sure the adhesive has no leaks in the seal. A poor adhesive seal is a very common problem when air leaking occurs. If the seal is good, ensure the center of the HME cassette is being fully compressed. The SLP staff can assist you in improving the seal of the adhesive and/or properly compressing the HME cassette.
|
- Larybutton:Because the Larybutton is self-retaining, it is important it fit properly, especially when making a voice. Although the SLP staff should properly size/fit the Larybutton, changes to your stoma shape/size over time are possible. If you notice the Larybutton is leaking air when trying to speak, the SLP staff can be helpful in determining if you need a change in this regard.
|
- FreeHands Device:Be sure the adhesive has no leaks in the seal. A poor adhesive seal is a very common problem when air leaking occurs. Also be sure the valve is positioned in the “talk” position. In order to achieve voicing with this device, it is very important this be properly fitted. If this has all been done and you are noticing persistent air leakage, contact the SLP staff for further assistance.
|